如何在ESXi 7.0 U3上添加網卡驅動程式並為Intel NUC製作自定義ISO？| 如何修復無網絡問題？
Table of Contents
- Introduction
- Overview of the Known Issue
- Understanding Intel NUC and UC
- Minimum Requirements for ESXi Installation
- Finding Compatible Network Drivers
- Adding Network Driver to ESXi 7.0 Update 3
- Creating a Custom ISO for Intel NUC and UC
- Steps to Install ESXi 7.0 Update 3 on Intel NUC
- Conclusion
- Resources
Introduction {#introduction}
Installing ESXi 7.0 Update 3 on Intel NUC and UC systems can sometimes lead to a known issue where the installation does not detect any network adapters. This issue can be resolved by adding a suitable network driver to the ESXi installation. In this article, we will discuss the steps to fix this known issue and successfully install ESXi 7.0 Update 3 on Intel NUC and UC systems.
Overview of the Known Issue {#known-issue}
During the installation of ESXi 7.0 Update 3 on Intel NUC and UC systems, an error message may appear stating that no network adapters were detected. The error message suggests that either no network adapters are physically connected to the system or a suitable driver could not be located. This indicates that a compatible network driver is missing.
Pros:
- Easy to identify the cause of the error.
- Resolving the issue allows for successful installation of ESXi 7.0 Update 3.
Cons:
- Users may need to manually add the network driver, which requires additional steps.
Understanding Intel NUC and UC {#intel-nuc-uc}
Intel NUC (Next Unit of Computing) is a small Palm-sized system commonly used in VMware home labs. It comes in various models, such as Intel NUC 10, Intel NUC 11, and Intel NUC 12. These systems can support up to 64GB of memory and have customizable storage options. Intel NUC systems are equipped with power buttons, USB ports, SD card slots, and HDMI connections.
UC, which stands for "You See," is a customized version of Intel NUC systems used in home labs. These systems are typically used for virtualization purposes and require network adapters for proper functionality.
Pros:
- Intel NUC systems are compact and ideal for home labs.
- Supports customizable storage options.
- Easy to connect multiple peripherals.
Cons:
- Some models may have limitations on memory or storage capacity.
- Requires manual installation and troubleshooting for ESXi 7.0 Update 3.
Minimum Requirements for ESXi Installation {#minimum-requirements}
When installing ESXi on any system, it is necessary to ensure that the system meets the minimum requirements. For ESXi 7.0 Update 3, a 1Gbps network card is a minimum requirement. However, during the installation of ESXi on Intel NUC and UC systems, the error message suggests that a suitable network driver is missing.
Finding Compatible Network Drivers {#compatible-network-drivers}
To resolve the known issue of no network adapters being detected during the installation of ESXi 7.0 Update 3, it is necessary to find a compatible network driver. VMware provides a community network driver for ESXi, which can be downloaded from their official website. This network driver is compatible with Intel Ethernet cards and supports ESXi 7.0 Update 3.
Pros:
- Official VMware community network driver is available.
- Supports a wide range of Intel Ethernet cards.
- Compatible with ESXi 7.0 Update 3.
Cons:
- Compatibility limited to Intel Ethernet cards.
Adding Network Driver to ESXi 7.0 Update 3 {#add-network-driver}
After downloading the community network driver, it needs to be added to the ESXi 7.0 Update 3 installation. This can be achieved by combining the downloaded driver with the ESXi 7.0 Update 3 offline bundle. Once the driver and the offline bundle are combined, a custom ISO can be created for the Intel NUC and UC systems.
Pros:
- Resolves the known issue of no network adapters being detected.
- Provides a customized ISO for installation on Intel NUC and UC systems.
Cons:
- Requires additional steps to combine the driver and offline bundle.
- Users need to have access to the ESXi 7.0 Update 3 offline bundle.
Creating a Custom ISO for Intel NUC and UC {#create-custom-iso}
To create a custom ISO for Intel NUC and UC systems, it is necessary to combine the ESXi 7.0 Update 3 offline bundle with the community network driver. This can be achieved using VMware PowerCLI commands. By following the provided steps, a custom ISO with the network driver included can be created. This custom ISO can then be used to install ESXi 7.0 Update 3 on Intel NUC and UC systems.
Pros:
- Allows for a customized installation process.
- Ensures compatibility with Intel NUC and UC systems.
- Provides a streamlined method for adding the network driver.
Cons:
- Requires familiarity with PowerCLI commands.
- Users may need to install additional software (i.e., VMware PowerCLI).
Steps to Install ESXi 7.0 Update 3 on Intel NUC {#install-esxi-nuc}
Once the custom ISO is created, it can be used to install ESXi 7.0 Update 3 on Intel NUC systems. The bootable USB created from the custom ISO can be inserted into the Intel NUC system, and the installation process can be initiated. Following the prompts and selecting the appropriate options will allow for a successful installation of ESXi 7.0 Update 3 on Intel NUC systems.
Pros:
- Allows for a step-by-step installation process.
- Provides a graphical interface for installation.
- Ensures a successful installation of ESXi 7.0 Update 3.
Cons:
- Users may need to adjust BIOS settings for booting from USB.
- Installation may take some time.
Conclusion {#conclusion}
In conclusion, the known issue of no network adapters being detected during the installation of ESXi 7.0 Update 3 on Intel NUC and UC systems can be resolved by adding a compatible network driver. By following the provided steps and creating a custom ISO, users can successfully install ESXi 7.0 Update 3 on Intel NUC and UC systems. It is essential to ensure that the correct network driver is used for compatibility.
Resources {#resources}
No difficulty
WHY YOU SHOULD CHOOSE TOOLIFY
