Troubleshoot Intel WiFi 6 AX101: Fix Error 10/43 & Connection

Find AI Tools
No difficulty
No complicated process
Find ai tools

Troubleshoot Intel WiFi 6 AX101: Fix Error 10/43 & Connection

Table of Contents

  1. 📡 Introduction
  2. 🛠️ Perform Power Cycle
  3. ⚙️ Make Sure Wi-Fi is Enabled in BIOS
  4. 🔄 Run Network Troubleshooter
  5. 💻 Disable and Enable Network Adapter
  6. 🔧 Start WLAN AutoConfig Service
  7. 🔄 Perform Network Reset
  8. 🔄 Reinstall Network Driver
  9. ⚡ Set Wireless Adapter Settings to Maximum Performance
  10. 📥 Install Wireless Driver from Manufacturer Website
  11. 🖥️ Update System BIOS
  12. 🔄 Reset Your Computer

Introduction

Welcome to today's guide where we'll troubleshoot and fix issues with your Intel Wi-Fi 6 ax101 on your Windows computer. It can be incredibly frustrating when you encounter error codes like 10 or 43 or face connection issues with your Wi-Fi. But fret not, as we're here to guide you through each step to resolve these issues.


🛠️ Perform Power Cycle

The first step in troubleshooting any connectivity issue is often a power cycle. Start by shutting down your computer and unplugging the power cable. If you're on a laptop, disconnect the charger. Hold down the power button for about 20 to 30 seconds to release any static electricity. Additionally, turn off your Wi-Fi router, wait for a few seconds, then restart it. After the system restarts, attempt to connect to your Wi-Fi again.

Pros:

  • Quick and simple method to reset hardware.
  • Clears any residual static electricity.

Cons:

  • May not resolve complex software-related issues.

⚙️ Make Sure Wi-Fi is Enabled in BIOS

Ensure that Wi-Fi is enabled in your system BIOS. To access the BIOS, restart your computer and repeatedly tap the F2 key (or appropriate key for your system) as soon as it starts up. Once in the BIOS, locate the Wi-Fi setting and ensure it's enabled.

Pros:

  • Provides direct control over hardware settings.
  • Useful for ensuring Wi-Fi functionality at a fundamental level.

Cons:

  • Requires knowledge of accessing and navigating BIOS settings.

🔄 Run Network Troubleshooter

Windows includes a built-in troubleshooter that can often resolve common network issues. Navigate to the troubleshooter through the settings menu and run the network adapter troubleshooter. Follow the prompts to complete the process and restart your computer afterwards.

Pros:

  • Automates diagnosis and resolution of common network issues.
  • Simple and user-friendly interface.

Cons:

  • Limited effectiveness for complex issues.

💻 Disable and Enable Network Adapter

Another troubleshooting step involves disabling and then re-enabling the network adapter. Access the Device Manager, locate your network card, right-click, and choose to disable it. After a moment, right-click again and select enable. Attempt to connect to your network again.

Pros:

  • Forces a refresh of network adapter settings.
  • Can resolve driver-related issues.

Cons:

  • May not address underlying hardware faults.

🔧 Start WLAN AutoConfig Service

The WLAN AutoConfig service manages wireless connections on your system. Access the Services menu, locate WLAN AutoConfig, and ensure it's set to automatic. Start the service if it's not already running, and try connecting to your Wi-Fi again.

Pros:

  • Ensures essential services are running for wireless connectivity.
  • Can resolve issues related to service disruptions.

Cons:

  • Limited effectiveness if the issue lies elsewhere.

🔄 Perform Network Reset

Performing a network reset can often resolve stubborn connectivity issues. Navigate to network settings and initiate a network reset. Follow the prompts, restart your computer, and attempt to reconnect to your Wi-Fi network.

Pros:

  • Resets network settings to default, potentially clearing configuration errors.
  • Can resolve issues related to corrupted network configurations.

Cons:

  • Requires reconfiguration of network settings after reset.

🔄 Reinstall Network Driver

If issues persist, consider reinstalling the network driver. Access the Device Manager, uninstall the network adapter, then restart your computer. Windows will automatically reinstall the default driver. Attempt to connect to your Wi-Fi again after the restart.

Pros:

  • Addresses issues related to corrupted or outdated drivers.
  • Provides a clean slate for driver installation.

Cons:

  • Requires a restart, which may disrupt workflow.

⚡ Set Wireless Adapter Settings to Maximum Performance

Optimizing wireless adapter settings for maximum performance can sometimes improve connectivity. Access power options in the control panel, navigate to wireless adapter settings, and set them to maximum performance. Apply the changes and attempt to reconnect to your Wi-Fi.

Pros:

  • Improves network performance by prioritizing throughput over power conservation.
  • Can alleviate issues related to slow or unstable connections.

Cons:

  • May slightly increase power consumption, especially on battery-powered devices.

📥 Install Wireless Driver from Manufacturer Website

If issues persist, consider downloading and installing the latest wireless driver from your system manufacturer's website. Connect to the internet via Ethernet if Wi-Fi is unavailable, download the driver, and install it. Restart your computer and attempt to connect to your Wi-Fi again.

Pros:

  • Ensures you have the latest compatible driver for your hardware.
  • Addresses potential compatibility issues with default drivers.

Cons:

  • Requires additional hardware (Ethernet cable) if Wi-Fi is unavailable.

🖥️ Update System BIOS

Updating your system BIOS can sometimes resolve hardware-related issues. Visit your system manufacturer's website, download the BIOS update, and follow the instructions to install it. Ensure your computer is adequately powered throughout the update process. After updating, attempt to connect to your Wi-Fi.

Pros:

  • Fixes hardware-related compatibility issues.
  • Enhances system stability and performance.

Cons:

  • Requires careful attention and may pose a risk if done incorrectly.

🔄 Reset Your Computer

As a last resort, consider resetting your computer. Back up your data, initiate the reset process through the settings menu, and follow the prompts. After the reset, reconnect to your Wi-Fi network and verify if the issue persists.

Pros:

  • Provides a clean slate for resolving persistent issues.
  • Can address complex software-related issues.

Cons:

  • Erases all data and settings, requiring reconfiguration and data restoration.

Highlights

  • Troubleshooting guide for fixing Intel Wi-Fi 6 ax101 issues on Windows computers.
  • Detailed step-by-step instructions for resolving common connectivity problems.
  • Covers a range of troubleshooting methods from basic to advanced.
  • Emphasizes the importance of system updates and driver maintenance for optimal performance.

FAQ

Q: Is it necessary to update the system BIOS? A: While updating the system BIOS can potentially resolve hardware-related issues, it should be done cautiously as an incorrect update could cause further problems. Only update the BIOS if you're experiencing specific issues that are documented to be addressed by the update.

Q: Can a network reset affect other devices connected to the same network? A: No, a network reset only affects the settings and configurations on the individual device where it's performed. Other devices connected to the same network should not be impacted.

Q: Why does disabling and enabling the network adapter sometimes work? A: Disabling and enabling the network adapter forces the device to reset its configuration and re-establish its connection to the

Most people like

Are you spending too much time looking for ai tools?
App rating
4.9
AI Tools
100k+
Trusted Users
5000+
WHY YOU SHOULD CHOOSE TOOLIFY

TOOLIFY is the best ai tool source.

Browse More Content