Artillery Genius Review: The Good and the Bad

Table of Contents

1. Introduction
2. Overview of the Artillery Genius 3D Printer
3. Similarities to the Artillery Sidewinder
4. Special Features of the Artillery Genius
5. Built Area and Size
6. Direct Driven Extruder
7. Compatibility with Filaments
8. Silent Operation
9. Downsides of the Artillery Genius
10. Limitations with Filament Spool Size
11. Comparing to the Artillery Sidewinder
12. Impressive Printing Speed
13. Versatility of Z Hop Method
14. Profiles for the Artillery Genius
15. Conclusion
16. Stay Informed with Brian's Website
17. Supporting Brian's Channel

The Artillery Genius 3D Printer: A Great Addition to Your Toolbox

Are You in search of a high-quality 3D printer that offers great performance and versatility? Look no further than the Artillery Genius. As an experienced creator in the world of 3D printing, I have had the opportunity to test out this printer, and I must say, it has exceeded my expectations. In this article, I will provide an in-depth review of the Artillery Genius, discussing its features, benefits, and some limitations. So, let's dive right in and explore what makes this printer truly remarkable.

Overview of the Artillery Genius 3D Printer

The Artillery Genius is part of the renowned Artillery 3D printer lineup, and it shares many similarities with its sibling, the Artillery Sidewinder. With its compact size and impressive printing capabilities, the Artillery Genius has quickly gained popularity among 3D printing enthusiasts. This printer boasts a built area of 220 by 220 by 220 millimeters, making it suitable for various printing projects.

Similarities to the Artillery Sidewinder

If you are familiar with the Artillery Sidewinder, you'll find the Artillery Genius to be quite similar. The Genius offers the same exceptional print quality and reliability as its predecessor but in a slightly smaller form factor. It maintains the direct driven extruder design, eliminating the need for a Bowden cable. This allows for seamless printing with flexible filaments, opening up a world of creative possibilities.

Special Features of the Artillery Genius

One of the standout features of the Artillery Genius is its silent operation. As I demonstrate in my video review, you can hardly hear the printer as it works its magic. This is particularly advantageous for those who prefer a quiet working environment or have their 3D printer in close proximity to their workspace. Say goodbye to intrusive noise and hello to a serene printing experience.

Built Area and Size

While the Artillery Genius may be smaller in size compared to the Sidewinder X1, its built area is more than sufficient for most 3D printing projects. Whether you're creating small prototypes or intricate designs, the Genius can accommodate your needs. Its 220 by 220 by 220 millimeter build volume offers ample space to bring your ideas to life, all while maintaining consistent print quality.

Pros:

• Compact size, making it suitable for limited spaces
• Generous built area for a wide range of project sizes
• Consistent print quality

Cons:

• Smaller size limits the use of larger filament spools
• Limited availability of custom filament holders for special filaments

Direct Driven Extruder

The direct driven extruder of the Artillery Genius is a game-changer in terms of filament compatibility. By having the extruder located on the printer itself, rather than remotely through a Bowden cable, the Genius can handle various filaments with ease. Whether you prefer working with flexible filaments, standard ones, or even engineering-grade materials, this printer will impress you with its versatility.

Compatibility with Filaments

No matter the Type of filament you're working with, the Artillery Genius can handle it all. I personally enjoy using the Artillery Genius to print with the EnGenius filament, which provides ABS-like qualities and excellent print results. Additionally, I have experimented with the new life filament, a multicolored, rainbow-style filament that's both fun and visually appealing.

Pros:

• Wide compatibility with various filament types
• Ability to handle flexible filaments with ease
• Consistent print results across different filaments

Cons:

• Limited space for storing larger filament spools
• Challenging to utilize small filament spools without custom holders

Silent Operation

If you've ever used a 3D printer before, you're probably familiar with the noise they can generate. One of the standout features of the Artillery Genius is its remarkably silent operation. As shown in my video review, the printer operates at an almost inaudible level, allowing you to work in a peaceful environment without any disruptive humming or buzzing noises.

Downsides of the Artillery Genius

While the Artillery Genius excels in many areas, it does have a few downsides that should be considered. For those involved in production work, where large batches of parts are printed simultaneously, the limited space for filament spools on top of the printer can be an inconvenience. Additionally, the use of a volcano-style hot end restricts the size of the filament spool that can be used.

Pros:

• Exceptional printing speed, enabling fast project completion
• Quick Z hop method for efficient layer changes
• Ideal for creating profiles with unique settings

Cons:

• Incompatibility with larger filament spools for production work
• Challenges in accommodating small specialty filaments
• Limited filament spool size due to the printer's design

Comparing to the Artillery Sidewinder

As Mentioned earlier, the Artillery Genius shares many similarities with the Artillery Sidewinder. However, one noticeable difference is the filament spool holder. While the Sidewinder X1 had some difficulties when it came to changing the filament spool holder, it was feasible. In contrast, the Genius lacks the flexibility to accommodate various spool sizes, limiting its compatibility with certain filaments.

Impressive Printing Speed

The Artillery Genius is a beast when it comes to speed. Not only can it print at high speeds, up to 100 millimeters per Second, but it also moves swiftly during the printing process. The Z hop method, allowing the Z-axis to move up and down between layer changes, is executed flawlessly by this printer. Its rapid movements ensure minimal print time and enhanced printing efficiency.

Versatility of Z Hop Method

If you're looking to experiment with new settings and techniques for your 3D prints, the Artillery Genius offers a viable option. The Z hop method, which allows the printer to lift the Z-axis during non-printing moves, is a feature I personally enjoy. It enables cleaner prints and reduces the risk of unwanted defects caused by nozzle dragging or collision with previously printed sections.

Profiles for the Artillery Genius

To help you get started with the Artillery Genius, I have been working on a comprehensive profile that encompasses the optimal settings and configurations. This profile will be available on my website, along with a separate video explaining its creation. By subscribing to my channel and turning on the notification Bell, you'll be alerted as soon as the profile is ready for download.

Conclusion

In conclusion, the Artillery Genius is a phenomenal 3D printer that offers exceptional print quality, versatility, and silent operation. With its direct driven extruder, compatibility with various filaments, and generous built area, this printer is a valuable addition to any maker's toolbox. Though it has a few limitations with filament spool size, the Artillery Genius makes up for it with its impressive printing speed and Z hop capability. So, if you're in the market for a reliable and efficient 3D printer, look no further than the Artillery Genius.

Stay Informed with Brian's Website

For more information on the Artillery Genius, as well as other 3D printers and laser engravers, be sure to visit my website. It serves as a comprehensive resource, providing valuable insights, reviews, and guides to help you navigate the world of 3D printing. Stay informed and up to date by subscribing to my channel and accessing all the valuable content available on my website.

Supporting Brian's Channel

If you found this review helpful and are considering purchasing the Artillery Genius or any other 3D printers, please consider using the affiliate links provided in the description or on my website. By doing so, you contribute to the growth and development of my channel, enabling me to Continue creating valuable content. Your support is greatly appreciated.

Highlights:

• The Artillery Genius is a compact yet powerful 3D printer that offers exceptional print quality.
• It shares similarities with its sibling, the Artillery Sidewinder, but in a smaller form factor.
• The direct driven extruder allows for compatibility with various filaments, including flexible ones.
• Silent operation ensures a peaceful working environment without disruptive noise.
• Downsides include limitations in filament spool size and accommodation of specialty filaments.
• The Artillery Genius impresses with its rapid printing speed and versatility in settings.
• The Z hop method enhances printing efficiency and reduces the risk of nozzle dragging.

Frequently Asked Questions (FAQ)

Q: Can the Artillery Genius handle large printing projects? A: While the Genius is smaller in size, its built area is sufficient for most printing projects. However, it may not be suitable for large-scale production work due to limitations with filament spool size.

Q: Is the Artillery Genius compatible with specialty filaments? A: The Genius can handle various filaments, including specialty ones like multicolored or rainbow-style filaments. However, its design restricts the size of filament spools that can be used.

Q: Can the Artillery Genius accommodate larger filament spools? A: Unfortunately, the Genius has limited space for larger filament spools. This may pose challenges for those involved in production work or using filaments that come in larger sizes.

Q: Is the Artillery Genius suitable for beginners in 3D printing? A: Yes, the Genius is beginner-friendly and offers excellent print quality. Its direct driven extruder and compatibility with different filaments make it a versatile choice for beginners and experienced users alike.

Q: How can I access the profile for the Artillery Genius? A: The profile, along with a separate video on its creation, will be available on Brian's website. Make sure to subscribe to his channel and turn on the notification bell for updates on its release.