Fix Synology RS815+ Red Light Alert with Resistor Addition

Table of Contents

1. Introduction
2. The Issue with Synology Rock Station
3. Possible Solution: Adding a Resistor
4. Steps to Add a Resistor to Synology RS815 Plus
5. Soldering the Resistor
6. Verifying the Soldering
7. Putting the Synology Server Back Together
8. testing the Synology Server
9. Running the Synology Assistant
10. Conclusion

Introduction

Have you been experiencing issues with your Synology Rock Station? Is the red light flashing and the indicators for the hard drives on amber? If so, you're not alone. Many users have encountered similar problems after updating their Synology systems. In this article, we will discuss a possible solution to this issue and guide you through the steps of adding a resistor to your Synology RS815 Plus. By following these instructions, you can resolve the update-related bugs and bring your Synology server back to life.

The Issue with Synology Rock Station

After updating the Synology system, users have reported a variety of issues with their Synology Rock Station. One common problem is the appearance of a flashing red light and amber indicators for the hard drives. This issue is believed to be caused by an update bug affecting the Atom Processor used in this model. As a result, Synology may discontinue this product, leading users to purchase new models.

Possible Solution: Adding a Resistor

To address the update-related bugs and restore functionality to your Synology server, one potential solution is to add a resistor. By regulating the current and voltage to the processor, the resistor can help resolve the issues caused by the update. In the following sections, we will guide you through the process of adding the resistor to your Synology RS815 Plus.

Steps to Add a Resistor to Synology RS815 Plus

Before proceeding with the resistor addition, it is important to ensure you have the necessary tools and equipment. You will need a soldering iron, a voltmeter, and a set of resistors. Additionally, make sure to follow safety precautions and work in a well-ventilated area.

1. Start by removing the board panel of your Synology RS815 Plus. Locate the RAM slots, as you will need to solder the resistor nearby.
2. Obtain a 100 ohms resistor from your local electronic store or your hardware collection.
3. Identify the first hole on the right side of the first row and the third hole on the Second row.
4. Place the resistor in the identified holes, ensuring that the gold side is on the right side and the brown part is on the left side.
5. Prepare your soldering iron and solder the resistor in place, ensuring a secure connection.
6. Once the soldering is complete, use a voltmeter to verify the accuracy of the connection.
7. Trim any excess wiring or solder to ensure a clean finish.

Soldering the Resistor

Soldering the resistor is a crucial step in adding it to your Synology RS815 Plus. By following these steps carefully, you can ensure a successful soldering process.

1. Double-check the positioning of the resistor. The gold part should be on the right side of the first hole, and the brown color code should be on the second row's third hole.
2. Use a voltmeter to confirm that the soldering is secure and that the connection is reliable.
3. Trim any excess wires or solder to maintain a tidy appearance.

Verifying the Soldering

Before reassembling the Synology server, it is essential to verify the soldering to ensure that the resistor has been added correctly. Follow these steps to verify the soldering:

1. Check the positioning of the resistor. It should be in the first hole on the right side and the third hole on the second row.
2. Use a voltmeter to ensure that the soldering has been completed successfully and that there is a stable connection.
3. Trim any excess wiring or solder to maintain a neat appearance.

Putting the Synology Server Back Together

Now that the resistor has been added and the soldering has been verified, it is time to put your Synology server back together. Follow these steps:

1. Carefully place the board panel back onto your Synology RS815 Plus, ensuring all components Align correctly.
2. Gently secure the board panel in place, taking care not to damage any of the internal components.

Testing the Synology Server

With the Synology server reassembled, it is time to test its functionality. Follow these steps to ensure everything is working correctly:

1. Restore power to the Synology RS815 Plus.
2. Observe the status lights and indicators. The red alert status should be resolved, indicating that the issue has been resolved.
3. Allow the server to boot up and load all the configuration settings and operating system files.

Running the Synology Assistant

To fully ensure that your Synology RS815 Plus is back to normal, run the Synology Assistant. Here's how to do it:

1. Access the Synology Assistant on your computer.
2. Check if your Nas server is live and ready.
3. Access the GUI by entering the IP address provided by the Synology Assistant.
4. Ensure that all functions and features are working correctly.

Conclusion

By following the steps outlined in this article, you can resolve the issues related to the Synology Rock Station update bug. Adding a resistor to your Synology RS815 Plus can help regulate the current and restore proper functionality to the server. With this fix, you can once again rely on your Synology server for all your storage and networking needs. Subscribe to our Channel for more helpful tutorials and IT-related content.

Highlights

• Resolve issues with Synology Rock Station after an update
• Add a resistor to your Synology RS815 Plus for a guaranteed fix
• Steps and precautions for soldering the resistor
• Verify the soldering and reassemble the Synology server
• Test functionality and run the Synology Assistant for full recovery

FAQ

Q: How can adding a resistor fix the issues with my Synology Rock Station? A: By adding a resistor, you can regulate the current and voltage to the processor, which helps resolve the bugs caused by the update.

Q: Do I need any special tools to add the resistor to my Synology RS815 Plus? A: You will need a soldering iron, a voltmeter, and a set of resistors. Make sure to follow safety precautions and work in a well-ventilated area.

Q: Can I use a different resistor value instead of 100 ohms? A: It is recommended to use a 100-ohm resistor as specified in the instructions. Using a different value may not yield the desired results.

Q: Is the resistor addition a permanent solution? A: Yes, by adding the resistor, you can permanently resolve the issues caused by the update. Your Synology RS815 Plus should function properly afterward.

Q: Will this fix void my warranty? A: Modifying your Synology RS815 Plus may void your warranty. Proceed with caution and consult Synology support for further guidance.

Q: Where can I find the Synology Assistant? A: You can download the Synology Assistant from the official Synology website.

Q: Are there any risks involved in adding a resistor to my Synology RS815 Plus? A: While the process itself is relatively safe, there is always a risk of damaging the hardware if not done correctly. Exercise caution and follow the instructions carefully.

Q: Can I use this method for other Synology models? A: The resistor addition method described in this article is specifically for the Synology RS815 Plus. Different models may require different approaches, so make sure to research and follow the appropriate instructions for your specific model.

Q: What do I do if the issues persist after adding the resistor? A: If the issues continue after adding the resistor, it is recommended to contact Synology support for further assistance and troubleshooting.

Resources:

• Synology website: www.synology.com